MENU

勇飞五金
1
勇飞五金
2
勇飞五金
3
勇飞五金
4

ABOUTYONGFEI

PICTURE

PROFILE

Dongguan City Yongfei Hardware Products CO..LTD was established in May 1st, 2000 with only two auto-lathing machines & three workers. Under about 20 years' innovation & development, now Yongfei & is branches have an area of more than 16000 square meters(and our subsidiary has an area about 8000 square metersI as well as more than 500 employees(and our subsidiary has about 150 workers). In order to satisfy our customers' requirements, our company owns many kinds of machining equipments & Inspecting facilities as fllows:

Machining equipments: 280pcs high precise turning & milling compound CNC machine from MIYANO, TSUGAMI & CITIZEN; 70pcs CNC machining center fromFANUC, BROTHER & TSUGAMI; In our subsidiary. 80pcs domestic CNC machines, about 200pcs of precise auto-lathing machines and 300pcs second processing machines.

2000

Since2000

16000

Plant area of 16,000 square meters

500

More than 500 employees

PICTURE

PRODUCTS

PICTURE
picture

WORKSHOPS

PICTURE
STS

STS

STS

STS
Akira-Seiki

Akira-Seiki

Akira-Seiki

Akira-Seiki
Factory building

Factory building

Factory building

Factory building
Company gate

Company gate

Company gate

Company gate
Reception

Reception

Reception

Reception

NEWS

PICTURE
Common process structure of parts in casting process

2021

01 05

Common process structure of parts in casting process
Most of the common structures on parts are obtained by forging (or casting) and machining, so they are called process structures. Knowing the common process structure on a part is the basis for learning a part drawing.
Common process structure of parts in casting process

2020

12 14

Common process structure of parts in casting process
Most of the common structures on parts are obtained by forging (or casting) and machining, so they are called process structures. Knowing the common process structure on a part is the basis for learning a part drawing.
CNC knowledge

2020

11 09

CNC knowledge
Numerical control (English name: Numerical Control abbreviation: NC) technology refers to the use of digital instructions composed of numbers, characters and symbols to realize the motion control of one or more mechanical devices. CNC is generally controlled by a general-purpose or special-purpose computer for digital program control. Therefore, CNC is also called Computer Numerical Control (CNC), which is called CNC in foreign countries. The concept of NC is rarely used.
Process analysis method for CNC machining parts

2020

10 19

Process analysis method for CNC machining parts
Before you start programming, you must analyze the design drawings and technical requirements in detail to get the best machining solution. First, the original data required for the development of CNC machining process lines 1. Parts design drawings, technical materials, and assembly drawings of the products.

PARTNER

PICTURE

Copyright：Dongguan Yongfei Hardware Products Co., Ltd    All Rights Reserved     Powered by：www.300.cn    粤ICP备05036161号 

Business License